Setup guide

Set up Mac call audio for Saley

Saley listens on two separate inputs: your microphone for the seller side, and Mac system audio for the customer side. This guide covers what to set up, a safe 30-second check, and what to do when one side is missing.

Starter is $69/month for 20 call hours. Cancel anytime. Downloading does not start a subscription. Subscription terms are on the pricing page. Saley needs macOS 13 or later.

Prerequisites

Before you start

  • A Mac running macOS 13 Ventura or later. There is no Windows build.
  • Saley installed on that Mac, and the call app or browser you will use.
  • Use headphones, so call audio from your speakers does not reach the microphone.
  • Permission from everyone on the call to record. Confirm the consent prompt if Saley shows it, and obtain consent yourself regardless of the prompt, because you remain responsible for any participant consent required where the call takes place.
  • A Playbook is optional. Without one, coaching is general. A missing Playbook is not an audio requirement.

Two channels

Which input is which

Saley labels microphone input as the seller and Mac system audio as the customer. Your voice should arrive through the microphone, and the people you hear should arrive through system audio.

Feeding customer audio into the microphone input labels it as the seller. If your voice is missing, coaching loses your side of the conversation. Read more about how the two channels work on the call recording page.

Permissions

Allow access in macOS

Saley needs two permissions. Microphone covers your voice. Screen & System Audio Recording covers the audio you hear.

  1. Quit Saley, then choose Apple menu > System Settings > Privacy & Security > Microphone and turn Saley on. Microphone access covers the built-in microphone, a USB microphone and inputs on an external audio interface.
  2. Choose Privacy & Security > Screen & System Audio Recording in System Settings and turn Saley on. On older macOS versions the same pane is called Screen Recording. Follow the label your Mac shows.
  3. Reopen Saley. If macOS or Saley says to quit and reopen after a change, do that. Restarting the Mac is not part of these steps.
  4. On macOS 15 or later, macOS may ask once more at the first real capture whether Saley can capture directly, even with the toggle on. Saley's setup checklist asks you to confirm it before your first call, so choose Allow when macOS asks.
  5. Check Saley's setup checklist and choose Refresh. Permission granted is not the same as a healthy signal, so finish with the 30-second check below. An unknown status is unknown, not granted.

Apple's article says macOS can allow an app to record both screen and audio, or only audio. Saley's current capture path needs its screen capture access, so this guide does not promise that an audio-only choice is enough. Follow Saley's setup checklist.

If a Mac is managed, access can be restricted by this Mac or its administrator and cannot be changed in Saley. If an external microphone still does not work after you allow access, check the manufacturer for compatibility information and updates.

Apple sources retrieved November 14, 2026: Control access to screen and system audio recording on Mac and Control access to the microphone on Mac.

Routing

Choose the microphone and call audio source

  1. Open Saley, then Settings, then Audio. Microphone input uses the system default microphone unless you choose another one. It is your seller side.
  2. System audio is All system audio by default. You can optionally limit it to a running desktop call app or browser.
  3. Saley captures by application, not by tab or URL. A call in a browser runs in the browser, so pick the browser if you limit capture to one app. A filter cannot separate other tabs, media or notifications playing in the same browser or app. Close or mute unrelated sources before you record. There is no integration to install, and no meeting bot joins the call.
  4. If the chosen app is unavailable or the filter is rejected at startup, Saley resets the selection to All system audio and recording continues. It shows a quiet notice in Settings > Audio, and the Record tab says "Recording fell back to a default audio device." with an Open settings link. This is a quiet notice, not an error banner. Fatal capture errors are separate and stop the recording. A filter is not privacy isolation. Open Settings > Audio and check the current selection and notice before you rely on filtering.
  5. Change capture selections before you start recording. The controls are unavailable while recording, and your choice is applied to the next recording. Rerun the 30-second check after you change a device or route.

This guide does not guarantee that Saley works with your microphone, headset or audio interface, and it has not been tested on your hardware.

Call apps and headsets

Call apps, phones and headsets

  • Saley does not integrate with call apps. A Zoom, Google Meet or Microsoft Teams call, a softphone or a browser call is captured the same way when its audio plays on this Mac.
  • Saley cannot capture the other side of a call that does not play on this Mac, such as a desk phone or a mobile phone call.
  • With a USB or Bluetooth headset, the headset microphone is your seller side. Choose it in Settings > Audio, or leave the system default if the headset is the default. The customer's voice you hear in the headset is still Mac system audio.
  • This guide has not tested your headset. Run the 30-second check with the headset you will use on calls.

Self-check

Run a safe 30-second check

Synthetic

Synthetic checklist and example. Not a product screenshot or a real test, and not evidence that any hardware works.

  1. Put on headphones.
  2. Open your call app or browser and run the speaker and microphone test in your call app.
  3. In Saley, open the setup checklist, review Audio settings and choose Refresh.
  4. For the baseline check, set System audio to All system audio. If you limit capture to an app or browser instead, play the speech in that app or browser, because audio from other apps is not captured.
  5. Record 30 seconds in Saley. Test only yourself and a short spoken clip you are allowed to use. Do not use a real customer call or media. Confirm the consent prompt if it is shown.
  6. While recording, say one short sentence, then play the spoken clip so you can hear it on the Mac. Non-speech sound need not appear in the transcript.
  7. Stop, open the call and read the transcript. Your sentence belongs on the seller side, YOU, and the clip on the remote side, THEM. If a side is missing, find it in the table below.

A completed checklist is not proof that both sides were captured. Check the recording and transcript yourself, even if the checklist says it completed.

Both sides present (synthetic): YOU: Testing my microphone for the setup check. THEM: This is test audio playing on the Mac.

Remote side missing (synthetic): YOU: Testing my microphone for the setup check.

Troubleshooting

Fix a missing or wrong side

Find what you see, then take the next action. Rerun the 30-second check after each change.

On a smaller screen, swipe the table sideways, or focus it and use the arrow keys to scroll.

What you seeLikely causeNext action
Your voice is missing (no seller side)Microphone access is off, or the selected microphone is wrong or disconnected.Turn Saley on under Privacy & Security > Microphone, quit and reopen Saley, check the microphone in Settings > Audio, then rerun the 30-second check.
The customer is missing (no remote side)Screen & System Audio Recording is off, Saley has not picked up a change, macOS has not confirmed call audio capture, or the chosen call app is not the one playing the call.Turn Saley on under Privacy & Security > Screen & System Audio Recording (Screen Recording on older macOS), reopen Saley if asked, and choose Allow if macOS asks to capture directly. Set System audio to All system audio, then rerun the check. If the filter was reset, Saley shows a quiet notice, not an error, in Settings > Audio. Open Settings > Audio and check the current selection and notice before you rely on filtering.
Both sides are missingBoth permissions are off, or the recording did not start.Check Microphone and Screen & System Audio Recording, then choose Refresh in the setup checklist. If a fatal capture error stops the recording, quit and reopen Saley, and contact us if it repeats. This is separate from the quiet fallback notice.
Permission status shows unknown or unavailableSaley could not read the status, or the check has not finished.Treat it as unknown, not as granted. Choose Refresh, check System Settings yourself, then run the 30-second check. Contact us if it stays unavailable.
A saved microphone or call app is not availableThe saved microphone is disconnected, or the saved call app is not running.Reconnect the microphone or choose another in Settings > Audio. For a call app, open it, then refresh. All system audio works without choosing an app.
The same voice appears on both sidesCustomer audio from your speakers is reaching the microphone.Use headphones and rerun the check. If it continues, read the next row about audio routed into the microphone.
Customer audio comes from another computer, a USB audio device or LoopbackSaley labels microphone input as the seller and Mac system audio as the customer. Feeding customer audio into the microphone input labels it as the seller. If your voice is missing, coaching loses your side of the conversation.We have not validated your exact external-computer, USB audio, or Loopback routing. Contact us before subscribing if you use a customer-only or unusual audio setup.
Saley closes, crashes or will not start recordingThis may not be an audio permission problem.Do not assume a permission change fixes it. Quit and reopen Saley and try again. If it repeats, contact us with the details listed below.

Screen sharing

Check screen sharing before a customer call

  1. Saley requests native macOS capture protection for the always-on overlay and the Live Assist window. Some screen-capture paths can bypass it, so Saley cannot promise that either one stays out of every capture.
  2. Share the meeting or presentation window rather than your entire display.
  3. Before your first customer call, share your screen with a colleague, open Saley's overlay, and ask what they receive.
  4. Repeat that check after you change your call app, browser or macOS version.

Limits

Consent, cloud processing and limits

Audio and text are processed in the cloud. This is not an offline or local-only setup. Read the privacy policy for details.

Confirm the consent prompt if Saley shows it, and obtain consent yourself regardless of the prompt, because you remain responsible for any participant consent required where the call takes place.

We have not validated customer-only audio from another computer, a USB audio device or Loopback. Contact us before subscribing if you use a customer-only or unusual audio setup.

Support

What to send if you contact us

Use the contact page and describe: your macOS version, the Saley app version shown in Settings, the Saley screen you were on, your call app or browser, the kind of microphone (built-in, USB or interface), which side was missing, and what the setup checklist said.

Do not send customer recordings or transcripts. A description is enough.

Audio setup FAQ

Mac audio setup questions

Do I need a Playbook before I record a call?

No. A Playbook is optional. Without one, coaching is general. A missing Playbook is not an audio requirement.

Which macOS permissions does Saley need?

Microphone for your voice, and Screen & System Audio Recording for the audio you hear. On older macOS versions the second one is called Screen Recording. Saley needs macOS 13 or later.

Is permission granted enough to know the audio works?

No. Permission granted is not the same as a healthy signal. macOS 15 or later may ask once more to let Saley capture directly, even with the toggle on, so confirm it in the setup checklist and run the 30-second check. An unknown status is unknown, not granted.

Do I install anything for calls in a browser?

No. A call in a browser runs in the browser, so pick the browser if you limit capture to one app, or leave System audio on All system audio. There is no integration to install.

What happens if customer audio goes into the microphone?

Saley labels microphone input as the seller and Mac system audio as the customer. Feeding customer audio into the microphone input labels it as the seller. If your voice is missing, coaching loses your side of the conversation. We have not validated your exact external-computer, USB audio, or Loopback routing. Contact us before subscribing if you use a customer-only or unusual audio setup.

Does Saley work with a headset?

A headset's microphone is your seller side, and the call audio you hear in it is still Mac system audio. This guide has not tested your headset, so run the 30-second check with it before a customer call.

Can people on the call see Saley when I share my screen?

Saley requests native macOS capture protection for the overlay and the Live Assist window. Some screen-capture paths can bypass it, so Saley cannot promise that either one stays out of every capture. Share the meeting or presentation window rather than your entire display, and check with a colleague first.

Is call audio processed on my Mac only?

No. Audio and text are processed in the cloud, and you remain responsible for any participant consent required where the call takes place.

Get Saley

Set up Saley on your Mac.

Download, allow Microphone and Screen & System Audio access, then run the 30-second check. From $69/month.

From $69/month · Cancel anytime · macOS 13+ · Apple Silicon & Intel